U Series Portable Smoke Ejector 24 in Blade (9,280 CFM)

FANTRAXX smoke ejectors have been designed to meet fire service needs. The units are available in various configurations and sizes to satisfy almost any application. FANTRAXX smoke ejectors produce high volumes of air in compact and efficient designs. Size range from 12" up to 24" blade diameters. Totally enclosed and explosion proof motors range in size from 1/3 HP to 1 1/2 HP. Entire fan assemblies are CSA certified and UL listed as shown

All FANTRAXX smoke ejectors are finished in a tough powder coat finish with cadmium plated safety guards. All motors are ball bearing and require no maintenance. Voltages other than those listed (including 50HZ) are available. Consult factory. All units are equipped with 6 feet of cord with a plug (explosion proof units are minus plug). Available accessories include hanger bars and hooks, collar adapters, flexible hoses, hose connectors and misting adapter kits.

Accessories:
Misting Adapter Kit: The misting Adapter Kit directs a fine water vapor mist into the discharge of a Smoke Ejector. This mist is evaporated into the air blowing from the fan reducing ambient air temperatures as much as 10-20° F, depending on temperature and humidity. Perfect for spot cooling in hot environments. The Misting Adapter Kit quickly attaches to a Smoke Ejector with spring clips. The Misting Adapter Kit connects to a standard 3/4" garden hose and uses less than 2 gallons of water per hour.
Collar Adapters: Collar Adapters are required when using flexible hose. Easily attached to the inlet or discharge of a Smoke Ejector with spring clips (included)
Flexible Hose: Our Flexible Hose is constructed from a PVC fabric sewn around a spring wire helix. Temperature range is from -20° to 200°F. Flexible Hose is flame resistant and compressible to 1/5 extended length. Comes with soft cuff and fastening strip.
Utility Guards: There are 2 styles of utility guards with or without the centers cut out.
Hose Connectors: Hose Connectors are required when attaching two lengths of hose together. Two gear clamps are included
Hanger Bars / Hooks

1 Speed

• Depth : 17"
• Width : 27 1/2"
• Height : 27 1/2"
• Type: Exhaust
• Drive: Direct Drive
• Mount Position: Portable
• Blades Dia. (in): 24
• No. of Blades: 4
• CFM High: 9,280
• Phase: 1
• Motor: TE
• HP: 1 1/5
• Voltage: 115 / 230
• Amps Full Load: 15.2
• Starting Amps: 69.8
• RPM: 1,725
• Weight (lbs): 112
• Warranty: 1 Year